Re: [9N78W] post Hull pics

I'm throwing this one in although most folks have seen this Liddle before. 7'2" 17" X 23" (up 7" from middle)X 15" X 3". I use a 9" Liddle flex around 12.5 inches up from the tail (measured from the back of the fin at the box). I ride in San Diego and the board needs a wave with little base to really turn on. I've only got it to 5th gear once or twice.

Unfortunately, you can't glean much info about a hull from a photo. You need to see one in person and run your hands over them, drag a straight edge along the bottom, etc. The differences between a Liddle and say a Paul Gross are really too subtle to see.