Re: [swied] Balsa Fish Project

Location: San Diego, CA, USA
Joined: Nov 21 2006
Posts: 657
Points: 306

Re: [swied] Balsa Fish Project

Here's the latest update...

In case you didn't see it I started another thread about making a plug with a leash loop. Here's the link

Here is how it turned out:


I installed the plug by drilling a hole in the board with a Forcner bit.


I sanded the board, and then glued in the plug with Titebond III water proof wood glue.

Balsa Fish Project By: swied (145 replies) November 22, 2006 - 12:12am